Completed planned HVAC maintenance per active membership agreement, including comprehensive A/C system inspection and filter replacement. Performed visual inspection of blower motor assembly and combustion components, documented system operation with interior component photography showing blower wheel, motor housing, and heat exchanger in normal operating condition. All maintenance items completed as scheduled with system functioning properly.

Completed planned HVAC maintenance on Ameristar air conditioning unit, including comprehensive system inspection of outdoor condenser unit and electrical components. Performed standard maintenance procedures, inspected dual capacitors and electrical connections within control panel, verified proper wiring and component functionality, and replaced 16x20x1 air filter per membership agreement.

Responded to emergency plumbing call for fire-damaged burst pipe in attic space. Upon arrival, confirmed water supply had been shut off to prevent further property damage. Assessed 2-3 inch diameter pipe that had ruptured due to fire exposure, causing active water leak prior to shut-off. Documented extensive damage to piping system in crawlspace area near HVAC equipment and ductwork. Inspected surrounding PVC plumbing lines, gas connections, and mechanical systems for additional fire-related damage or compromised integrity. Photographed affected areas showing damaged pipe runs, exposed structural elements, and proximity to heating and ventilation components to document scope of repairs needed.

Conducted on-site assessment of existing sump pump system in residential basement utility area. Evaluated current primary sump pump configuration and basin setup for replacement requirements. Inspected electrical infrastructure, including nearby breaker panel and available power sources for both primary and backup pump installations. Assessed plumbing connections, discharge piping routes, and drainage pathways. Documented existing conditions through photographs showing basement layout, exposed ceiling joists with electrical wiring, utility equipment positioning, and available workspace around sump pump location. Provided detailed quote for replacing primary sump pump with new unit and installing Sump Jet backup pump system to ensure continuous water removal capability during power outages or primary pump failure.

Responded to service call for 22-year-old heating system experiencing loud noise described as similar to a baseball bat hitting metal. Upon inspection, diagnosed worn blower motor bearings on air handler unit, evidenced by excessive noise during operation and visible wear on Timken bearing assembly. Inspected pulley system, motor mounting brackets, and ductwork connections for additional damage or misalignment. Documented condition of equipment with photographs showing bearing assembly, mounting hardware, and surrounding components including filter and ductwork with moisture accumulation and age-related staining. Advised homeowner of findings and recommended replacement of blower motor bearings to restore quiet operation and prevent potential motor failure.

Completed full HVAC system installation including Lennox ML196 high-efficiency furnace with first-time PVC venting configuration, Lennox ML13 air conditioning unit, media air filter, and new thermostat. Performed system commissioning with comprehensive diagnostics, collected refrigerant charge measurements, and balanced airflow throughout the system to ensure optimal performance and efficiency.

Conducted on-site evaluation of residential gas water heater located in basement utility area. Inspected tank-style water heater with atmospheric venting, confirmed gas fuel source via yellow flexible gas line connection, and assessed copper supply piping and electrical control components. Documented equipment condition and specifications to provide replacement estimate.

Completed planned air conditioning maintenance per membership agreement. Performed comprehensive inspection and servicing of outdoor condensing unit, including cleaning of condenser coils, verification of refrigerant levels, and testing of electrical components and fan operation. Indoor air handler inspection completed with filter assessment documented for customer to provide filter specifications at later date, as filters were not included in this maintenance visit. All systems tested and operating within normal parameters upon completion.

Replaced and reconfigured the drain line assembly for the downstairs bathroom sink. Installed new white PVC P-trap system with proper connections from the sink drain to the main waste line, ensuring correct slope and secure fittings throughout. Verified all connections are leak-free and drainage flows properly.

# Service Report: Water Heater Installation Successfully installed a new 50-gallon draft vent water heater in the utility area, replacing the existing unit per approved specifications. The installation included connecting copper supply lines, gas piping with proper shut-off valves, and appropriate venting system to ensure code-compliant operation. Additionally, performed preventive maintenance on two air conditioning units as part of the scheduled service call, completing all work with full system testing and customer payment collected on-site.

# Plumbing Inspection - Fire-Damaged Trailer Completed comprehensive plumbing inspection of fire-damaged trailer to assess extent of damage and determine repair requirements. Inspection focused on evaluating water supply piping, water heater connections, and overall plumbing infrastructure condition following fire incident. ## Inspection Findings Accessed crawl space and utility areas to examine plumbing system components. Documented extensive fire and heat damage throughout accessible areas, with significant deterioration of structural elements and plumbing infrastructure. Water supply lines showed evidence of exposure to extreme temperatures, with visible damage to pipe insulation and surrounding materials. Examined existing piping beneath structure, which displayed severe corrosion, rust accumulation, and compromised integrity due to fire exposure and subsequent environmental conditions. Metal components exhibited advanced oxidation with heavy surface deterioration. Water heater

# Plumbing Estimate Summary Conducted on-site assessment for tub and surround replacement project. Performed detailed measurements of existing bathroom fixture area, documenting dimensions and spatial requirements for new tub and surround installation that customer has selected through Mid City supplier.

# HVAC Install - Complete System - CH ## Job Summary Successfully completed installation of a complete HVAC system consisting of a Lennox EL297 high-efficiency furnace with 1610 media filter and a Lennox ML13 air conditioning unit, reusing existing thermostats for both systems. ## Work Performed Installed Lennox EL297 variable-speed gas furnace in basement utility area with proper venting configuration using PVC piping system. Integrated 1610 media filter cabinet for enhanced air quality and system protection. Configured condensate drainage system with appropriate routing and connections. Mounted and secured furnace unit on concrete pad with proper clearances maintained per manufacturer specifications. Installed Lennox ML13 split-system air conditioning unit with outdoor condenser and indoor evaporator coil. Ran refrigerant lines between outdoor and indoor components using copper line sets with proper insulation. Connected evaporator coil to furnace plenum for integrated cooling o

# Service Summary Successfully installed a Bradford White natural gas tanked water heater (Model BAG56B120, 40,000 BTUH input) with proper venting and clearances per manufacturer specifications. Additionally, completed tub shower drain installation and collected final payment balance to close out the project.

Responded to a service call for a 4-year-old furnace with reported water leakage. Upon inspection of the HVAC system, identified the source of the leak and performed necessary repairs to resolve the issue. System is now functioning properly with no signs of water leakage.

Performed biannual maintenance on Lennox ML13KC1-030 system containing R-454B refrigerant (factory charge 4 lbs 14 oz). Inspected equipment information plate confirming proper specifications and replaced batteries in Honeywell Home TH4110U2005 thermostat. Completed standard HVAC membership maintenance procedures including filter replacement with two 410 filters as included in service plan.

Performed inspection of dual water heater installation in utility room. Successfully installed customer-supplied anode rods to both units as requested. System appears to be functioning properly with appropriate copper pipe connections and utility hookups.

Performed routine A/C maintenance on outdoor condensing unit as part of scheduled service plan. Cleaned condensing unit exterior, removing accumulated dust, debris, and cobwebs from ventilation grille to improve airflow and system efficiency. Cleared surrounding area of fallen leaves to prevent potential airflow restriction and ensure proper unit operation.

Performed scheduled A/C maintenance on residential system, including inspection of outdoor condenser unit. Observed some dust accumulation on condenser coils, which was cleaned to maintain proper airflow and system efficiency. Replaced standard 14x20x1 air filter as part of routine maintenance protocol. All connections and mounting hardware for exterior components were verified secure, including the weatherproof electrical connections and insulated refrigerant lines.

Performed scheduled A/C maintenance on unit with MP HVAC Membership. Discovered significant dust and debris accumulation on capacitor and surrounding electrical components. Cleaned capacitor and electrical connections, verified proper operation of 410 refrigerant system, and confirmed customer had replaced required components (#10).