Expert Plumbing & HVAC Services in Mishawaka, IN

Completed scheduled air conditioning maintenance as part of HVAC membership plan within the promised 12-4pm service window. Performed comprehensive system inspection of outdoor condensing unit, including examination of refrigerant line set, associated copper piping, and condensate drainage components. All equipment photographed and documented showing proper installation and operational status of mechanical components.

Completed installation of Lennox ML13KC1-024 outdoor condensing unit and ADP uncased evaporator coil. Recovered existing R-22 refrigerant from old system using recovery equipment prior to unit removal. Mounted new Lennox condenser on existing concrete pad alongside other HVAC units servicing the multi-unit building. Installed ADP uncased coil in air handler, made refrigerant line connections, and completed electrical hookup to existing meter bank. Reused existing thermostat to maintain customer's familiar control interface. System was pressure tested, evacuated, charged to manufacturer specifications, and tested for proper operation. All components functioning as designed with appropriate temperature differential across coil.

Replaced existing water heater with new unit in basement utility area. Installation included connecting copper supply and return lines with brass fittings, integrating red-handled circulation piping, and ensuring proper PVC drainage configuration. All plumbing connections were secured and tested for leaks, with system commissioned and verified operational.

Responded to water leak in 60-year-old residential property. Upon investigation, accessed crawlspace area and inspected exposed plumbing system between floor joists. Located source of leak at corroded copper supply line connection near brass gate valve and expansion tank assembly. Repaired compromised fitting, tested system under pressure, and verified all connections were secure with no further leakage detected.

Completed water heater installation in basement utility area. Installed new cylindrical water heater unit with proper copper supply line connections, brass compression fittings, and shutoff valves. Applied reflective insulation material to wall behind unit and insulated hot water outlet pipe with metallic wrap. All plumbing connections secured with industry-standard brass fittings and tested for proper operation.

Responded to water heater leak in basement with visible moisture spotting on floor. Upon inspection, identified active leak originating from A.O. Smith ProLine water heater plumbing connections. Examined copper piping, brass compression fittings, and associated components including pressure relief valve and expansion tank. Documented existing plumbing configuration with water treatment system and assessed condition of connections showing mineral deposits and corrosion consistent with prolonged leak activity. Reviewed membership benefits and available service options with property owner for necessary repairs to resolve ongoing water heater leak issue.

Completed scheduled air conditioning maintenance on AmeriStar condensing unit. Performed comprehensive system inspection including electrical components, capacitors, contactor, and relay assembly. All components functioning within normal parameters, unit operating efficiently.

Conducted site assessment for natural gas line installation to facilitate conversion from electric to gas stove. Evaluated existing utility access points, determined optimal routing path for new gas line, and documented current conditions of installation area. Provided customer with detailed estimate for required materials and labor to complete gas line extension work.

# HVAC Maintenance Service Completed Performed comprehensive planned maintenance inspection on outdoor condensing unit as part of Gold Level service agreement. Conducted thorough visual inspection of all accessible components with unit access panel removed to evaluate internal electrical and mechanical systems. Inspected dual capacitor assembly including silver run capacitor and SuperStarter hard start kit for proper operation and signs of deterioration. Verified all electrical connections throughout compartment, including multiple wire runs and terminal connections. Examined contactor relay assembly for contact wear and proper engagement. Assessed overall cleanliness of internal cabinet, noting accumulated dust and debris consistent with normal operation. Evaluated wire management and connection integrity of all colored wire runs including power supply and control circuits. Inspected wire connectors for secure attachment and signs of overheating. Examined exterior condensing coil

Completed scheduled air conditioning maintenance as part of membership plan. Performed comprehensive system inspection including electrical components, capacitors, contactors, transformer, and control board. All electrical connections verified secure with no signs of damage or wear requiring immediate attention. Checked outdoor condensing unit operation, cleaned and inspected fan assembly. System operating within normal parameters with no deficiencies noted.

Relocated and secured high voltage electrical line running between outdoor disconnect box and A/C condenser unit to ground level, eliminating tripping hazard while maintaining proper electrical code compliance and system functionality. Verified all connections and tested unit operation upon completion.

Responded to callback for loose register boot following recent HVAC installation. Upon inspection, found register boot had separated from ductwork connection in attic space. Documented existing conditions with photos showing boot disconnection and surrounding ductwork installation. Unable to definitively determine if issue was directly related to original installation work or resulted from other factors. Secured and reconnected register boot to ensure proper airflow and system operation.

Successfully completed installation of new Lennox EL22KCV-36 air conditioning system with CK40CT-36B cased coil. Positioned outdoor condensing unit on concrete pad against exterior wall, installed weatherproof electrical disconnect box with proper conduit routing, and verified all electrical connections meet code requirements. System tested and confirmed operational with proper airflow and cooling performance.

Completed installation of new Lennox ML13KC1-024 2-ton condensing unit and ADP uncased HE31C30A130A evaporator coil on existing concrete pad. Successfully reconnected system to existing thermostat and verified proper operation of all components upon startup.

Completed scheduled air conditioning maintenance on outdoor condensing unit as part of membership plan. Performed comprehensive system inspection including electrical connections at disconnect box, refrigerant line examination, condenser coil assessment, and fan operation verification. All components found operating within normal parameters and unit returned to service.

Completed scheduled air conditioning maintenance as part of HVAC membership plan. Performed comprehensive system inspection including electrical components, capacitor testing, and verification of all wire connections and control board functionality. All components found operating within normal parameters and unit left in proper working condition.

Completed full HVAC system installation featuring a Lennox ML196 high-efficiency gas furnace and ML13 air conditioning unit in basement utility area. Reused existing thermostat, filter rack, and condensate pump while re-routing the pump's discharge hose to the washing machine standpipe for proper drainage. Installed new 1-inch air filters and reconnected ductwork boot serving the nearby bathroom that had become detached. All ductwork connections were secured, electrical wiring was properly terminated, and system was tested for proper operation. Installation met manufacturer specifications and local code requirements.

Responded to water leak complaint originating from commercial deli cooler unit. Upon arrival, conducted visual inspection of affected area including wall panels, ceiling tiles, and adjacent infrastructure. Documented existing conditions through photographic evidence showing interior commercial space with beige wall paneling, acoustic ceiling tiles, and overhead fluorescent lighting fixtures. Identified potential moisture intrusion points and assessed structural components for water damage indicators including discoloration and wear patterns on wall surfaces. Inspected vertical piping and conduit systems running along wall for signs of active leakage or compromised connections.

Completed comprehensive HVAC tune-up and inspection on residential Lennox air conditioning unit as part of promotional maintenance service. Performed full system evaluation including electrical connections at disconnect box, refrigerant levels, condenser coil inspection, and operational testing to ensure optimal performance for the cooling season.

Completed planned air conditioning maintenance as part of HVAC membership agreement. Performed comprehensive system inspection of air handler unit, checked refrigerant lines and service ports, verified condensate drain operation, and installed new 16x25x1 air filter. All components found operating within normal parameters with no issues identified.