Performed scheduled A/C maintenance service per membership agreement. Inspected internal electrical components including capacitor, control board, and wiring connections, noting normal operational wear. System was thoroughly evaluated with all connections verified secure and functioning properly.

Performed scheduled A/C maintenance under membership agreement. Inspected electrical components including capacitor and wiring connections within air handler. Customer handles media pad replacement as per agreement.

Responded to a service call back regarding no water flow to the home after customer restored water supply per previous instructions. Upon inspection, identified issue with copper supply lines and orange PVC pipe in the basement/crawlspace area. Repaired connection points at the brass fittings where flow was restricted and verified proper water pressure restoration throughout the home.

Successfully installed a complete HVAC system in an unfinished basement, including a Lennox EL297UH070 furnace, EL18KCV-036 condensing unit, CK40CT-30/36 cased coil, and 600 by-pass humidifier. Completed first-time PVC venting installation with new line set and thermostat wire, and installed non-WiFi T6 Thermostat for system control.

Successfully modified plumbing system by cutting into 4" cast-iron stack and installing a 4x4x2 T with trap for washing machine drainage. Applied high-temperature silicone to furnace inducer motor to resolve issue.

Installed sump pump in basement utility area, connecting to existing PVC drain system with appropriate fittings and joints. Configured horizontal and vertical pipe sections to ensure proper water flow, addressing moisture issues evident on concrete floor.

Completed re-piping of gas lines from meter to multiple appliances in basement utility area. Cleaned threads and resealed all fittings at connection points, including manifold assembly with color-coded connectors. Performed comprehensive pressure test upon completion to verify system integrity with zero leaks detected.

Completed annual maintenance on outdoor AC unit including inspection of electrical components. Replaced 410 filter and installed #35 humidifier pad. Unit appears to be in good working condition with no visible issues detected.

Conducted comprehensive inspection of utility closet plumbing system, identifying broken pipes and assessing water damage to surrounding walls. Evaluated existing copper supply lines, PVC drainage components, and brass fittings for functionality and code compliance. Documented exposed plumbing infrastructure in bathroom/utility area requiring renovation, including deteriorated floor tiles and compromised wooden framing around plumbing penetrations.

Completed installation of new complete HVAC system with successful startup of both furnace and AC components. Retrieved required riser box from shop inventory (part in F-2). Performed comprehensive system testing using digital thermometer to verify proper temperature differential at supply registers, confirming optimal system operation.

Completed scheduled A/C tune-up maintenance service, which included replacing the 14x20x1 air filter. Observed damaged insulation on refrigerant line requiring attention and significant leaf debris accumulation around the outdoor condenser unit which was cleared to improve airflow and system efficiency.

Conducted comprehensive HVAC replacement estimate for residential property with existing functional furnace/AC system. Inspected electrical panel accessibility in utility area and evaluated current air ventilation system, noting standard return air grille condition. Customer expressed interest in furnace/AC replacement options but declined financing discussion.

Conducted a site assessment to evaluate the existing chimney system for B-vent replacement. Documented the current installation with detailed photos of both the rooftop brick chimney structure and the attic connection point where wooden joists meet the metal ductwork. Noted signs of possible moisture issues and aging on both the wooden structural elements and the weathered brick chimney exterior.

Responded to emergency service call for bathtub drain leak causing water accumulation on bathroom floor. Upon inspection, identified faulty PVC pipe connection in the crawl space beneath the bathroom. Repaired the compromised section by replacing the damaged fitting and securing with appropriate metal clamps, successfully resolving the leak and restoring proper drainage function.

Inspected aging heating system in response to no-heat complaint. Found pressure regulator showing signs of oxidation with multiple shut-off valves in the plumbing installation. Examined the boiler unit with connected copper piping, pressure gauge, and insulated ductwork for proper operation.

Diagnosed 14-year-old heating system that failed to start with no airflow through vents. Inspection revealed faulty pressure switch preventing system operation. Replaced pressure switch, tested system functionality, and verified proper operation with adequate airflow restored.

Responded to a service call for a shower leaking when hot water is running and a secondary leak in basement. Inspection revealed significant frost and ice buildup at a pipe joint connection in the utility area, with visible moisture and water damage on the floor beneath. Also identified connection issues between copper and PVC piping in the ceiling area where insulation was compromised, contributing to the leakage problems.

Conducted site inspection for potential gas line installation from meter to accommodate customer's planned deck construction. Assessed exterior conditions including brick structure and surrounding area, which was covered in snow. Documented current site layout with photographs to support future installation planning.

Completed return service call to address previously unfinished plumbing connection. Successfully connected and pressure tested supply line with Legend valve assembly, integrating existing copper piping with new PVC components. Wall damage around installation area was noted but not addressed as it falls outside scope of plumbing services.

Replaced defective pressure reducing valve, auto vent, and zone valve on aging hydronic heating system to restore proper heat function. System was thoroughly tested after component replacement to confirm proper pressure regulation and zone operation.